Ride1Up 700 Series: parts and specs
Replacement parts and specs for the Ride1Up 700 Series: Schwalbe Super Moto-X 27.5 x 2.4 tires, Tektro 180 mm hydraulic brakes, Shimano 8-speed, KD218 display, 48V 15Ah or 13.4Ah battery and 48V 2A charger.
The Pedalwise team started this page from official manuals, support pages and repair videos. Fixed this yourself, or spotted something wrong? Help improve it.
Tools
Specs are for the stock bike as sold; check your own bike before you buy. This page covers the Ride1Up 700 Series commuter, sold from 2020 to 2024 in step-over and step-through frames. It was built with AKM, Bafang or Shengyi motors; the controller, motor cable and cadence sensor must match yours. Batteries came with 18650 cells (13.4Ah) or 21700 cells (15Ah), and the two are not cross-compatible. Read the label on your battery before you order. Ride1Up sells most parts below from one model parts page and its rear wheel and motor page; both showed in stock with no prices, read Nov 9, 2026.
Electrical parts on this list must match this exact model, and they are fitted at the external plugs or by a pro. Never open the battery, controller, motor or display. For charging trouble, start with battery won't charge and e-bike battery care.
Parts list
- Tire: Schwalbe Super Moto-X, 27.5 x 2.4". Tires from 1.75" to 2.4" wide fit; run 30 to 55 psi.
- Inner tube: 27.5" with a width range that covers 2.4", Schrader valve.
- Disc brake caliper: Tektro dual-piston hydraulic, 180 mm, with electric cutoff. Front and rear brake sets are on the parts page.
- Chain: KMC 8-speed.
- Cassette: Shimano 11 to 30T, 8-speed, with a Shimano Acera RD-M3000 derailleur and a 45T chainring. A derailleur hanger is on the parts page.
- Hub motor: 48V geared rear hub, 750 W sustained (AKM on the current build). Ride1Up's rear wheel and motor page lists 700 Series (AKM), 700 Series (Bafang) and 500/700 Series (Bafang) as a full wheel or stator only.
- Motor cable and hall sensors: Motor cables come in AKM and non-AKM versions on the parts page.
- E-bike controller: 48V 18A sine-wave. AKM, Bafang and Shengyi controllers are on the parts page.
- E-bike display: KD218 color display, on the parts page.
- Throttle: Left side thumb throttle, on the parts page, with a throttle extension cable.
- Pedal assist sensor: Cadence sensor, in a Bafang and AKM version and a Shengyi version, on the parts page.
- Brake cutoff sensor: The brake sensor cable is on the parts page.
- E-bike charger: 48V, 2 A charger and cable. Confirm the charger option for your bike with Ride1Up before you order.
- E-bike battery: 48V 15Ah Reention Rhino with 39 Samsung 21700 cells, UL 2271; earlier bikes have a 13.4Ah 18650 pack. The 700 Series battery page sells both (in stock, no price shown). Batteries are not returnable.
- Battery charge port: A battery port cover is on the parts page.
- E-bike lights: Buchel Shiny 80 headlight (80 lux) and a rear brake light. Headlight, tail light and light cable are on the parts page.
- Pedals: Wellgo alloy.
- Saddle: Selle Royal Freeway Plush Gel.
Tools for common jobs
- Hex keys: brake caliper, stem and handlebar bolts, and the 6 mm seat clamp.
- Tire levers: changing a tube.
- Floor pump with gauge: setting 30 to 55 psi; see set tire pressure.
- Axle nut wrench: rear wheel removal on the hub motor; see rear hub wheel removal.
- Torque wrench: crank, stem and handlebar bolts to the values in your manual.
- Brake pad spreader: resetting the Tektro pistons before new pads.
- Brake bleed kit: bleeding the Tektro hydraulic brakes with mineral oil; see bleed Tektro brakes.
- Chain checker: measuring 8-speed chain wear.
- Multimeter: testing charger output at its plug; see check your charger.
Where to buy
- Ride1Up's 700 Series replacement parts page, 700 Series battery page and rear wheel and motor page.
- Independent sellers: parts suppliers.
- A shop can order and fit parts: find a shop.
Common repairs
- Ride1Up troubleshooting and e-bike error codes
- Error 30 communication error, error 21 power cuts on hills and error 23 or 24 after wheel removal
- Brake sensor stops motor power
- Fix a flat on a rear hub motor wheel, replace disc brake pads and fix a spongy brake lever
Sources
- ride1up.com
- parts page, ride1up.com
- 700 Series battery page, ride1up.com
- rear wheel and motor page, ride1up.com
- support.ride1up.com
- ride1up.com
- ride1up.com
Stuck after these checks? Find a shop near you.
If these steps didn't fix it, find a shop near you in our partner network. For battery or wiring trouble, look for shops marked Battery and electrical.
Talk
Questions, things that worked for you, or something that looks wrong on this page.
Sign in to join the conversation.
CC BY-NC-SA 4.0Text by Pedalwise and contributors, shared under CC BY-NC-SA 4.0. Linked videos and manuals keep their own terms. How to reuse it