Reference

Lectric XPress (first generation): parts and specs

Replacement parts and specs for the first Lectric XPress and XPress 750 commuter: 27.5 inch tires, Type D pads for its mineral oil hydraulic brakes, 7-speed, 1-pin charger and semi-integrated 10.4Ah or 14Ah batteries, with Lectric's prices.

Last edited Nov 9, 2026 by Pedalwise team Edit History Add a subpage

The Pedalwise team started this page from official manuals, support pages and repair videos. Fixed this yourself, or spotted something wrong? Help improve it.

This page lists the common replacement parts for the first Lectric XPress commuter (2024), in 500 W and XPress 750 versions, high-step and step-thru. For the XPress2 Commuter and Cruiser, use their own parts pages. Specs are for the stock bike as sold; check your own bike before you buy. Full specs are in the XPress introduction, the XPress features post and the XPress user manual.

Photo needed: The XPress high-step from the drive side, showing the 7-speed freewheel and semi-integrated battery.. Add one

Electrical parts on this list must match this exact model, and they are fitted at the external plugs or by a pro. Never open the battery, controller, motor or display. For battery and charger trouble, start with battery won't charge and e-bike battery care.

Parts list

Tire: 27.5" city tires, 27.5 x 2.5" or 27.5 x 2.1" depending on the build, so check your sidewall.
Inner tube: match the 27.5" size on your sidewall. Lectric's parts store sells only 20" tubes.
Disc brake pads: Lectric's Four Brake Pads, Type D fit the XPress, $40, read Nov 9, 2026.
Disc brake caliper: hydraulic disc brakes that use mineral oil; service them with Shimano or Lectric oil.
Freewheel: 7-speed.
Hub motor: 500 W on the XPress and up to 750 W on the XPress 750, with 55 Nm and 85 Nm peak torque.
Throttle: right-hand thumb throttle.
Pedal assist sensor: torque sensor.
E-bike charger: Lectric's Battery Charger, 1 Pin is 54.6V, 2.0A with a DC 2.1 connector and fits the XPress1, $69, read Nov 9, 2026.
E-bike battery: 10.4Ah standard or 14Ah Long-Range. Lectric's Semi-Integrated Spare Battery is 48V, 10.4Ah, 500Wh and fits the XPress1 500 W high-step and step-thru, $315, and its Semi-Integrated Long-Range Spare Battery is 48V, 14Ah, 672Wh and fits the XPress 750 high-step and step-thru, $431, read Nov 9, 2026.

Tools for common jobs

Hex keys: 3, 4, 5 and 8 mm, for the throttle, stem, caliper, crank and pedal bolts.
Torx keys: T-25 for the disc rotor bolts, 5 to 8 Nm.
Tire levers: changing a tube.
Floor pump with gauge: setting pressure within the sidewall range.
Axle nut wrench: a 17 mm wrench for the rear axle nuts, 35 Nm.
Torque wrench: rear axle nuts 35 Nm, caliper bolts 10 Nm and pedals 35 Nm.
Brake pad spreader: resetting the pistons before new pads.
Brake bleed kit: bleeding the mineral oil brakes with Shimano or Lectric oil. See mineral brake oil.
Chain checker: catching chain wear early.
Chain lube: after cleaning and wet rides.
Chain tool: fitting a new chain.
Multimeter: testing charger output at its plug, as shown in check your charger. Never probe the battery.

Where to buy

Lectric's parts page and the product pages linked above.
Independent sellers: parts suppliers.
A shop can order and fit parts: find a shop.

Common repairs

Sources

Stuck after these checks? Find a shop near you.

Need a pro?

If these steps didn't fix it, find a shop near you in our partner network. For battery or wiring trouble, look for shops marked Battery and electrical.

Talk

Questions, things that worked for you, or something that looks wrong on this page.

CC BY-NC-SA 4.0Text by Pedalwise and contributors, shared under CC BY-NC-SA 4.0. Linked videos and manuals keep their own terms. How to reuse it