Reference

Lectric XP 1.0: parts and specs

Replacement parts and specs for the original Lectric XP 1.0 folding bike, step-over and step-thru: 20 x 4 tires and tubes, Type B pads for its mechanical brakes, 7-speed, 1-pin charger and legacy 48V 10.4Ah batteries.

Last edited Nov 9, 2026 by Pedalwise team Edit History Add a subpage

The Pedalwise team started this page from official manuals, support pages and repair videos. Fixed this yourself, or spotted something wrong? Help improve it.

Tools

Parts

This page lists the common replacement parts for the original Lectric XP 1.0 folding fat-tire bike (2019), step-over and step-thru. Specs are for the stock bike as sold; check your own bike before you buy. Full specs are in the XP 1.0 user manual, also on Lectric's user manuals page. The XP 1.0 uses 20 x 4 tires, unlike the 20 x 3 tires on the XP 2.0 and 3.0, so check the fit lists before you order.

Photo needed: The XP 1.0 folded, showing the mechanical disc brake caliper and 4 inch tires.. Add one

Electrical parts on this list must match this exact model, and they are fitted at the external plugs or by a pro. Never open the battery, controller, motor or display. For battery and charger trouble, start with battery won't charge and e-bike battery care.

Parts list

Tire: Lectric's Tires (2), 20" x 4" fit the XP 1.0 and XP Step-Thru 1.0, $90 for two, read Nov 9, 2026.
Inner tube: Lectric's Tube (1), 20" x 4.0" fits the XP 1.0, $27, read Nov 9, 2026; its product description gives a different size, so confirm with Lectric. Its Tubes (2), 20" x 3" to 4" also fit the XP 1.0; no price showed.
Disc brake pads: Lectric's Four Brake Pads, Type B fit the XP and XP Step-Thru 1.0 to 3.0 with mechanical brakes, $40, read Nov 9, 2026.
Disc brake caliper: mechanical disc brakes.
Freewheel: 7-speed Shimano freewheel with a thumb shifter.
Throttle: half-twist throttle on the right of the bar.
E-bike charger: Lectric's Battery Charger, 1 Pin is 54.6V, 2.0A with a DC 2.1 connector and fits the XP and XP Step-Thru 1.0, $69, read Nov 9, 2026.
E-bike battery: 48V, 10.4Ah with LG 18650 cells. Lectric's Legacy XP Spare Battery, 48V, 10.4Ah, 500Wh, fits the XP 1.0 to 3.0 step-over, $315 but sold out, and its Legacy XP Step-Thru Spare Battery fits the XP Step-Thru 1.0 to 3.0, $315, read Nov 9, 2026. Neither fits the XP4.

Tools for common jobs

Hex keys: caliper, stem, handlebar and crank bolts.
Tire levers: changing a tube on the 4 inch tires.
Floor pump with gauge: setting pressure within the sidewall range.
Axle nut wrench: removing the rear motor wheel; check the nut size on your bike.
Torque wrench: axle nuts 40 Nm, caliper and rotor bolts 7 Nm and pedals 35 Nm.
Cable cutters: trimming new brake or shift cables on the mechanical brakes.
Chain checker: catching chain wear early.
Chain lube: after cleaning and wet rides.
Chain tool: fitting a new chain.
Multimeter: testing charger output at its plug, as shown in check your charger. Never probe the battery.

Where to buy

Lectric's parts page and the product pages linked above.
Independent sellers: parts suppliers.
A shop can order and fit parts: find a shop.

Common repairs

Lectric troubleshooting, XP won't turn on and charger light stays red
E007, motor fault and E008, throttle or display
Adjust mechanical disc brakes and replace disc brake pads
Fix a flat on a rear hub motor wheel and set tire pressure
Clean and lube the chain and check and replace the chain
XP 3.0 parts for the later XP

Sources

Stuck after these checks? Find a shop near you.

Need a pro?

If these steps didn't fix it, find a shop near you in our partner network. For battery or wiring trouble, look for shops marked Battery and electrical.

Talk

Questions, things that worked for you, or something that looks wrong on this page.

CC BY-NC-SA 4.0Text by Pedalwise and contributors, shared under CC BY-NC-SA 4.0. Linked videos and manuals keep their own terms. How to reuse it