Added sources and updated by the Pedalwise team
Lectric ONE: parts and specs · Nov 9, 2026, 2:29 PM by Pedalwise team · reviewed Nov 9, 2026, 2:29 PM by Pedalwise team
What changed
19 lines added, 18 removed
This version
Replacement parts and specs for the Lectric ONE: 20 x 2.5 city tires and tubes, Type D pads, 180 mm rotors, Pinion gearbox with Gates belt, 1-pin charger and 48V 14Ah battery, with Lectric's prices.
This page lists the common replacement parts for the Lectric ONE commuter. It uses a sealed Pinion gearbox and a Gates belt instead of a chain and derailleur, so it needs no chain parts. Specs are for the stock bike as sold; check your own bike before you buy. Full specs are on the Lectric ONE product page.
Photo needed: The Lectric ONE from the drive side, showing the gearbox and belt..
Electrical parts on this list must match this exact model, and they are fitted at the external plugs or by a pro. Never open the battery, controller, motor or display. For battery and charger trouble, start with battery won't charge and e-bike battery care.
Parts list
- Tire: 20" x 2.5" city tires with Hippo Skin, Slime installed.
- Inner tube: Lectric's tube, 20" x 2.5" to 3.0" fits the Lectric ONE, $27, read Nov 9, 2026.
- Disc brake pads: Lectric's Four Brake Pads, Type D fit the Lectric ONE, $40, read Nov 9, 2026.
- Brake rotor: 180 mm, 1.8 mm thick.
- Disc brake caliper: hydraulic mineral oil brakes; check the maker on your calipers.
- Hub motor: Sutto 750 W rear hub, 1310 W peak, 85 Nm. The drivetrain is a Pinion C1.6i six-speed gearbox with a Gates CDC 113-tooth belt, 24T rear and 39T front cogs.
- E-bike controller: 24 amp, IP-65. Lectric's parts store doesn't sell one, so ask Lectric support.
- E-bike display: backlit color LCD with a USB-A port, IP-65.
- Throttle: thumb trigger below the left grip.
- Pedal assist sensor: cadence sensor with 96 magnets.
- E-bike charger: 2A charger included. Lectric's Battery Charger, 1 Pin, 54.6V, 2.0A, DC 2.1, fits the Lectric ONE, $69, read Nov 9, 2026.
- E-bike battery: 48V, 14Ah, 672Wh long-range pack. Lectric's External 14Ah Long-Range Spare Battery, 48V, 14Ah, 672Wh, fits the Lectric ONE, $431, read Nov 9, 2026.
- Battery charge port: external charging port.
- E-bike lights: integrated headlamp and brake-activated taillight.
- Pedals: removable quick-release pedals.
Tools for common jobs
- Hex keys: caliper, stem and handlebar bolts.
- Tire levers: changing a tube.
- Floor pump with gauge: setting pressure within the sidewall range.
- Axle nut wrench: removing the rear motor wheel; check the size on yours.
- Torque wrench: axle nuts and brake bolts, to your manual's values.
- Brake pad spreader: resetting the pistons before new pads.
- Brake bleed kit: bleeding when the lever feels soft. Confirm the fluid with Lectric first.
- Multimeter: testing charger output at its plug, as shown in check your charger. Never probe the battery.
Where to buy
- Lectric's parts page and the product pages linked above.
- Independent sellers: parts suppliers.
- A shop can order and fit parts: find a shop.
Common repairs
- Lectric troubleshooting
- Replace disc brake pads, bed in disc brakes and bleed hydraulic disc brakes
- Fix a flat on a rear hub motor wheel and set tire pressure
- Check your charger and store your battery for winter
Sources
- Lectric ONE product page, lectricebikes.com
- tube, 20" x 2.5" to 3.0", lectricebikes.com
- Four Brake Pads, Type D, lectricebikes.com
- Battery Charger, 1 Pin, lectricebikes.com
- parts page, lectricebikes.com
- External 14Ah Long-Range Spare Battery, lectricebikes.com
Stuck after these checks? Find a shop near you, or if you're in Austin, book a Pedalwise tech.