Bike repair stand

A repair stand clamps the bike and holds it at working height so the wheels spin freely. It makes brake, drivetrain and wheel work much easier.

What it's used for

Adjusting derailleurs, truing wheels and rotors, cleaning a chain and bleeding brakes all go faster with the bike held steady. A bike in a repair stand can stand in for a truing stand (Park Tool truing guide).

What to look for

• A weight rating above your bike's weight. E-bikes can be heavy, so this is the first thing to check. Ratings vary a lot. One Park Tool home stand is rated to 36 kg (80 lb), with the weight centered below the clamp and between the legs (Park Tool home stand), while a Park Tool lift stand built for e-bikes is rated to 54 kg (120 lb) (Park Tool lift stand). Your bike's weight is in its manual or spec sheet.
• A way to lift a heavy bike. The lift stand above lowers its clamp so you can clamp the seatpost or seat tube without lifting the bike (Park Tool lift stand).
• A clamp that fits your tubes. For example, these two stands have clamp ranges of 22 to 76 mm and 23 to 76 mm, and an adapter for D-shaped seatposts (Park Tool; Park Tool).

Using it safely

• Stay within the rated weight and keep the load centered as the maker describes (Park Tool).
• Follow the stand's own instructions. For example, don't use impact drivers to adjust Park Tool's lift stand (Park Tool).
• If your bike is over the rating, work with the bike on the ground or let a shop handle it.

Videos

Guides that use it

• Adjust a rear derailleur
• Check spokes and wheel true
• Clean and true brake rotors
• Clean and lube a chain
• Bleed hydraulic disc brakes

Sources

• Wheel truing (lateral and radial), Park Tool
• PCS-10.3 home mechanic repair stand, Park Tool
• PRS-30 mechanical lift repair stand, Park Tool